Harbor Freight Cordless Drill Review

Drill Master Model 69651. They call it a drill/driver but only has single speed and does not have much torque for stiff screws. The 1300 mA-hr Ni-Cad battery is good size. Charger is very small but gets the job done. An LED light illuminates the work area.
http://www.harborfreight.com/power-tools/cordless-drills/18-volt-38-in-cordless-drilldriver-with-keyless-chuck-21-clutch-settings-69651.html

Comments

jarrid cockey says:

have the exact one was using it and i was using a spade drill in it drilled one hole with it and drilled half through a 1×4 and drill battery died and had to resort to a dewalt

Carlos Cardova says:

AWESOME drill I got one dose the job YEAH OH YEAH …°¿° ?° °?…..
BOYEE !

The Paws says:

I got this little drill.. I opened it and stretched the clutch spring maybe 1/8 and found that I got a little more torque driving in large screws.

Jason Spencer says:

Thanks for your review and video!

Paul Woodlawn says:

Total GARBAGE !!!

yambo59 says:

Ive got this drill with flashlight and extra battery – worst problem is the chargers are junk.  Ive had to replace mine twice, about $6.00 for a new one, but they (will) die.  For the money it would be a great deal minus the charger problem.  Its not a smart charger and doesn’t turn off when the battery is charged.  If you don’t baby sit it and turn it off very soon after the green light comes on the charger burns up.  I finally had to resort to plugging the charger into a wall timer so it didn’t run over two – three hours.

Gabriel Escobar says:

I just purchased this but I’m unable to loosen the chuck. Any ideas? It says turn counter clockwise but for the life of me, I cant get it to open.

mike reece says:

I picked up one not too long ago and am quite pleased with it, very nice for light jobs.

pauliemak1 says:

I got one and the battery wont charge

ZP says:

I have this drill and I have to replace the chuck – does anyone know the thread pattern of the chuck screw? I know its a left hand screw, but not sure if its 1/4 x 20, 1/4 x 28, or 6mm. Thanks!

 Write a comment

*

Do you like our videos?
Do you want to see more like that?

Please click below to support us on Facebook!